MAGNI RANGE OF ATTACHMENTS

Magni offers a wide range of platforms, from the simplest, in order to be able to reach the desired heights in total safety, up to the most special models such as the one dedicated to working in the tunnel or the one for removing asbestos at high altitude. They are the perfect solution for the construction sector and for major maintenance works.

ATT – 01 – 001 Q-FIT I

P 1,4

Non-extendable platform with 250 kg maximum
capacity, type approved to carry two persons.
Galvanised, reinforced steel structure. Non-slip
floor covering to ensure the utmost safety when
working at height.

ATT – 01 – 003 Q-FIT I

RP1,4

Rotating platform (+/- 90°) with 250 kg maximum
capacity, type approved to carry two persons.
Galvanised, reinforced steel structure. Non-slip
floor covering to ensure the utmost safety when
working at height.

ATT – 01 – 005 Q-FIT I

RP2,2

Non-extendable rotating platform with 500 kg
maximum capacity, type approved to carry three
persons. Galvanised, reinforced steel structure.
Non-slip floor covering to ensure the utmost
safety when working at height. Platform equipped
with overload sensor and rack with a practical
anti-shock system which ensures smooth, even
rotational movements when stopping and starting
movement. Equipped with practical fork slots for
movement during storage.

ATT – 01 – 007 Q-FIT I

REP 2-4,5

Extendable rotating platform with 500 kg maximum
capacity, type approved to carry three persons.
Galvanised, reinforced steel structure. Non-slip floor
covering to ensure the utmost safety when working at
height. Platform equipped with overload sensor and
rack with a practical anti-shock system which ensures
smooth, even rotational movements when stopping
and starting movement. Equipped with a practical,
efficient extension system allowing you to gain one
metre per side. Equipped with practical fork slots for
movement during storage.

ATT – 01 – 009 Q-FIT I

REP 2-5.5

Extendable rotating platform with 500 kg maximum
capacity, type approved to carry three persons.
Galvanised, reinforced steel structure. Non-slip floor
covering to ensure the utmost safety when working at
height. Platform equipped with overload sensor and
rack with a practical anti-shock system which ensures
smooth, even rotational movements when stopping
and starting movement. Equipped with a practical,
efficient extension system allowing you to gain one and
a half metres per side. Equipped with practical fork
slots for movement during storage.

ATT – 01 – 009 Q-FIT I

REP 2-6.5

Extendable rotating platform with 500 kg maximum
capacity, type approved to carry three persons.
Galvanised, reinforced steel structure. Non-slip floor
covering to ensure the utmost safety when working at
height. Platform equipped with overload sensor and
rack with a practical anti-shock system which ensures
smooth, even rotational movements when stopping
and starting movement. Equipped with a practical,
efficient extension system allowing you to gain two
metres per side. Equipped with practical fork slots for
movement during storage.

ATT – 01 – 013 Q-FIT I

CRP 5

Special platform for use in tunnels, with a maximum
capacity of 500 kg and type approved for three
persons. Galvanised, reinforced steel structure.
Non-slip floor covering to ensure the utmost safety
when working at height. Equipped with integrated
protection grille on the upper part of the basket to
protect against falling debris. Equipped with rack with
a practical anti-shock system which ensures smooth,
even rotational movements when stopping and
starting movement. Equipped with practical fork slots
for movement during storage.

ATT – 01 – 026 Q-FIT I

REP 5.2-4,5 W0,6

Extendable rotating platform with 500 kg maximum
capacity, type approved to carry three persons.
Galvanised, reinforced steel structure. Non-slip floor
covering to ensure the utmost safety when working at
height. Platform equipped with overload sensor and
rack with a practical anti-shock system which ensures
smooth, even rotational movements when stopping
and starting movement. Equipped with a practical,
efficient extension system allowing you to gain one
metre per side. Equipped with practical fork slots for
movement during storage. Equipped with a practical
winch, 600 kg capacity. This can rotate +/- 90° manually,
and lift 0-64°.

ATT – 01 – 016 Q-FIT I

REP 10.2-4,7

Extendable rotating platform with 1,000 kg
maximum capacity, type approved to carry three
persons. Galvanised, reinforced steel structure.
Non-slip floor covering to ensure the utmost safety
when working at height. Platform equipped with
overload sensor and rack with a practical anti-shock
system which ensures smooth, even rotational
movements when stopping and starting movement.
Equipped with a practical, efficient extension
system allowing you to gain two metres per side.
Equipped with practical fork slots for movement
during storage.

ATT – 01 – 018 Q-FIT I

RPRAB 10-3,5

Special platform dedicated to the removal of asbestos
at height, with a capacity of up to 1,000 kg. Type
approved for two persons. This is composed of two
working stations equipped with deadman pedal on
both and two anchor points, one low and one high,
to allow egress at height. Non-slip floor covering to
ensure the utmost safety when working at height. The
front part tilts, allowing for easy offloading of materials.
Platform equipped with overload sensor and rack with
a practical anti-shock system which ensures smooth,
even rotational movements when stopping and starting
movement. Equipped with practical fork slots for
movement during storage.

ATT – 01 – 020 Q-FIT I

RRP 10.2,5-3,5

Extendable rotating platform with 1,000 kg maximum
capacity, type approved to carry three persons and
suitable for egress at height. This is composed of an
openable guide which facilitates operator ingress/
egress. The platform has sensors which disable
movements with the basket open. Galvanised,
reinforced steel structure. Non-slip floor covering to
ensure the utmost safety when working at height.
Platform equipped with overload sensor and rack
with a practical anti-shock system which ensures
smooth, even rotational movements when stopping
and starting movement.

ATT – 01 – 022 Q-FIT I

TP 2,10

Extendable telescopic platform with 200 kg
maximum capacity, type approved to carry two
persons. Galvanised, reinforced steel structure.
Non-slip floor covering to ensure the utmost safety
when working at height. Rotation +/- 90° is made
with an hydraulic actuator.

ATT – 01 – 024 Q-FIT I

TP O-U

Extendable rotating telescopic platform with a
maximum capacity of 200 kg. It is type approved
to carry two persons. Galvanised, reinforced steel
structure. Non-slip floor covering to ensure the
utmost safety when working at height. Equipped
with boom position sensor, which can be easily
consulted on the display in the cab. Rotation 340°
is made with an hydraulic actuator.

To effortlessly lift and move objects, more or less bulky, making the most of your Magni’s performance, our range of winches is the ideal solution. Compact, sturdy, they are top quality accessories, which bear Magni’s constructive signature in every design detail.

ATT – 02 – 001 Q-FIT I

W2,7

Winch with swivelling type-approved hook with
2,700 kg capacity. Attachment equipped with rope
pressure roller and hydraulic limit switch system
for rope raising/lowering. Metal storage support
included in code.

ATT – 02 – 002 Q-FIT I

W3,5

Winch with swivelling type-approved hook with
3,500 kg capacity. Attachment equipped with rope
pressure roller and hydraulic limit switch system
for rope raising/lowering. Metal storage support
included in code.

ATT – 02 – 004 Q-FIT I

W6

Winch with swivelling type-approved hook with
6,000 kg capacity. Attachment equipped with rope
pressure roller and hydraulic limit switch system
for rope raising/lowering. Metal storage support
included in code.

ATT – 02 – 006 Q-FIT I

W8

Winch with swivelling type-approved hook with
8,000 kg capacity. Attachment equipped with rope
pressure roller and hydraulic limit switch system
for rope raising/lowering. Metal storage support
included in code.

ATT – 02 – 008 Q-FIT I

W16

Winch with swivelling type-approved hook with
16,000 kg capacity. Attachment equipped with
rope pressure roller and hydraulic limit switch
system for rope raising/lowering. Metal storage
support included in code.

ATT – 02 – 009 Q-FIT I

W 3,5 – 1,75

Winch with swivelling type-approved hook, which
can be configured to two capacities: 3,500 kg dual
and 1,750 kg single. Attachment equipped with
rope pressure roller and hydraulic limit switch
system for rope raising/lowering. Metal storage
support included in code.

ATT – 02 – 010 Q-FIT I

W 3 – 6

Winch with swivelling type-approved hook, which
can be configured to two capacities: 6,000 kg dual
and 3,000 kg single. Attachment equipped with
rope pressure roller and hydraulic limit switch
system for rope raising/lowering. Metal storage
support included in code.

ATT – 02 – 018 Q-FIT I

W13

Winch with swivelling type-approved hook with
13,000 kg capacity. Attachment equipped with
rope pressure roller and hydraulic limit switch
system for rope raising/lowering. Metal storage
support included in code.

ATT – 02 – 012 Q-FIT I    |    ATT – 02 – 013 Q-FIT I

WB6

Winch with swivelling type-approved hook, which
can be configured to two capacities: 6,000 kg dual
and 3,000 kg single. Attachment equipped with
rope pressure roller and hydraulic limit switch
system for rope raising/lowering. Metal storage
support included in code.

ATT – 02 – 014 Q-FIT I

WB6

Winch with joint which allows it to be tilted back
to allow use on roads. Winch with swivelling
type-approved hook, which can be configured
to two capacities: 6,000 kg dual and 3,000 kg
single. Attachment equipped with rope pressure
roller and hydraulic limit switch system for rope
raising/lowering. Metal storage support included
in code. Improved performance compared to the
W6 thanks to the configuration of the attachment
itself, which has the drum on the boom and not
directly fastened to the winch.

ATT – 02 – 016 Q-FIT I

AWB6

Winch with swivelling type-approved hook, which
can be configured to two capacities: 6,000 kg dual
and 3,000 kg single. Attachment equipped with
rope pressure roller and hydraulic limit switch
system for rope raising/lowering. Metal storage
support included in code. Improved performance
compared to the W6 thanks to the configuration
of the attachment itself, which has the drum on
the boom and not directly fastened to the winch.

Wide range to meet market needs and to assist our operators directly in the workplace.  From the simplest fork carriers to those with heavy-duty capacities and larger fork sizes to be able to perform aggravating work in the most extreme conditions.

ATT – 03 – 001 Q-FIT I

FC5T

Floating fork carriage with 5,000 kg capacity

ATT – 03 – 003 Q-FIT I

FCF5T 1,3

Fork carriage with fork attachment plate, 5,000 kg
capacity, 1,300 mm width

ATT – 03 – 001 Q-FIT I

PCF

Floating fork carriage with 5,000 kg capacity

ATT – 03 – 006 Q-FIT I

PC

Floating fork carriage with 6,000 kg capacity.

ATT – 03 – 008 Q-FIT I

FC6T

Floating fork carriage with 6,000 kg capacity,
dedicated for model RTH 6.46.

ATT – 03 – 009 Q-FIT I

FC6T 6×5 FT

Floating fork carriage with 6.000 kg capacity,
increased width of 1,840 mm and minimum
closure 1,550 mm

ATT – 03 – 010 Q-FIT I

FCF6T 1,3

Forks with fork attachment plate, 6,000 kg
capacity, 1,320 mm width and 1,200 mm fork
length.

ATT – 03 – 012 Q-FIT I

FC6T FIX

Floating forks with 6,000 kg capacity.

ATT – 03 – 014 Q-FIT I

FC6T 72×72 FIX

Floating forks with 6,000 kg capacity, dedicated for
the TH range.

ATT – 03 – 015 Q-FIT I

FC8T

Floating forks with 8,000 kg capacity.

ATT – 03 – 017 Q-FIT I

FC8T 72×72

Floating fork carriage with 8,000 kg capacity, fork
width 1,840 and fork length 1,830 mm.

ATT – 03 – 018 Q-FIT I

F10T

Floating fork carriage with capacity up to 10,000 kg,
with load protection grid.

ATT – 03 – 019 Q-FIT I

FCP10T

Floating fork carriage with capacity up to 10,000
kg, with hydraulic movement of the individual forks
possible.

ATT – 03 – 018 Q-FIT I

FCP10T 2,5 C

Floating fork carriage with capacity up to 10,000 kg,
with load protection grid.

ATT – 03 – 020 Q-FIT I

FCPT10T 1,5

Fork carriage with capacity up to 10,000 kg,
with hydraulic movement of the individual forks
possible. Equipped with 2,500 mm long, 2,300 mm
wide forks. Load protection grid included.

ATT – 03 – 036 Q-FIT I

Fork carriage with capacity up to 10,000 kg, with
hydraulic movement of the individual forks and
combined side shift possible.

ATT – 03 – 021 Q-FIT I

FCP13T

Floating fork carriage with capacity up to 13,000 kg.

ATT – 03 – 022 Q-FIT I

F16T

Floating fork carriage with capacity up to 16,000 kg.

ATT – 03 – 023 Q-FIT I

FCP16T

Floating fork carriage with capacity up to 16,000
kg, with hydraulic movement of the individual forks
possible. Load protection grid included.

ATT – 03 – 024 Q-FIT I

FCPT16 2,4

Floating fork carriage with capacity up to 16,000 kg,
with hydraulic movement of the individual forks and
combined side shift possible. Load protection grid
included.

ATT – 03 – 025 Q-FIT I

FCP16T C

Floating ork carriage with 2,300 mm width and
capacity up to 10,000 kg, with hydraulic movement
of the individual forks possible. Load protection
grid included.

ATT – 03 – 026 Q-FIT I

FCP20T

Floating fork carriage with capacity up to 20,000
kg, with hydraulic movement of the individual forks
possible. Load protection grid included.

ATT – 03 – 027 Q-FIT I

FCP24T

Floating fork carriage with capacity up to 24,000
kg, with hydraulic movement of the individual forks
possible. Load protection grid included.

ATT – 03 – 028 Q-FIT I

FCP24T 2,4

Floating fork carriage with capacity up to 24,000
kg. Fork width 2,315 mm, fork length 2,400 mm.
Hydraulic movement of the individual forks
possible. Load protection grid included.

ATT – 03 – 029 Q-FIT I

FCP27T

Floating fork carriage with capacity up to 27,000
kg. Fork width 2,500 mm, fork length 2,400 mm.
Hydraulic movement of the individual forks
possible. Load protection grid included.

ATT – 03 – 030 Q-FIT I

FCP30T

Floating fork carriage with capacity up to 30,000
kg. Fork width 2,500 mm, fork length 2,400 mm.
Hydraulic movement of the individual forks
possible. Load protection grid included.

ATT – 03 – 031 Q-FIT I

FCPT30T 2,4 R

Lowered fork carriage with capacity up to 30,000
kg, with hydraulic movement of the individual forks
and combined side shift possible. Thinner forks and
without load protection and support grille.

ATT – 03 – 032 Q-FIT I

FCEP30T 2,4 R

Lowered fork carriage with capacity up to 30,000
kg, with hydraulic movement of the individual forks
possible.

ATT – 03 – 033 Q-FIT I

FCP35T

Fork carriage with capacity up to 35,000 kg,
with hydraulic movement of the individual forks
possible.

ATT – 03 – 037 Q-FIT I

FCP50T

Fork carriage with capacity up to 50,000 kg, with
hydraulic movement of the individual forks. Load
protection grid included.

ATT – 03 – 034 Q-FIT I

RFC 2,5

Retracting rotating forks which allow complete
360° rotation. These tough forks can lift and move
all kinds of materials, pallets and long boards up
to a maximum of 2,500 kg, in the smallest possible
space and in all directions. With practical dovetails
for improved positioning and fastening of the
forks in their seat. Equipped with a rotation block
which can limit the rotation to +/- 90°.

Accessories that are widely used because they are highly versatile and performing, both from a lifting capacity point of view and for the wide choice of
capacities offered. As always, Magni has designed a range of accessories specific to market demands, which can be used with every Magni in the catalog.

ATT – 04 – 001 Q-FIT I

J600

Fixed-hook jib which increases reach by a further
4 metres. Tubular structure to improve the
weight/capacity ratio.

ATT – 04 – 003 Q-FIT I

JV 800

Specific jib for machine equipped with winch
at the base of the boom. Tubular structure to
improve the weight/capacity ratio and to increase
the working range.
Winch at the lower end of the boom is not
included and must be ordered separately.

ATT – 04 – 005 Q-FIT I

JW800

Jib, length 7 metres, with integrated winch on
attachment. Tubular structure to improve the
weight/capacity ratio. Winch equipped with rope
pressure roller and hydraulic limit switch system
for rope raising/lowering.

ATT – 04 – 007 Q-FIT I

JW 800/1500

Jib with integrated winch on attachment which can
be folded and configured for two capacities. Fully
extended, with length of 7 metres, it has a single
capacity of 800 kg; folded, with 3.3 metre length, it
has a dual capacity of 1,500 kg. Winch equipped
with rope pressure roller and hydraulic limit switch
system for rope raising/lowering.

ATT – 04 – 009 Q-FIT I

JW1200/3000

Jib with integrated winch on attachment which can
be folded and configured for two capacities. Fully
extended, with length of 4.5 metres, it has a single
capacity of 1,200 kg; folded, with 1.6 metre length,
it has a dual capacity of 3,000 kg. Winch equipped
with rope pressure roller and hydraulic limit switch
system for rope raising/lowering.

ATT – 04 – 011 Q-FIT I

JW 1500

Jib with integrated winch on attachment, capacity
1,500 kg and length 2 metres. Tubular structure
to improve the weight/capacity ratio. Winch
equipped with rope pressure roller and hydraulic
limit switch system for rope raising/lowering.

ATT – 04 – 013 Q-FIT I

J2000

Dual T-section beam with fixed hook, capacity
2,000 kg and length 2.7 metres

ATT – 04 – 015 Q-FIT I

JW 2000

Jib with integrated winch on attachment, capacity
2,000 kg and length 2 metres. Tubular structure
to improve the weight/capacity ratio. Winch
equipped with rope pressure roller and hydraulic
limit switch system for rope raising/lowering.

ATT – 04 – 017 Q-FIT I

JW2700

Jib with integrated winch on attachment, capacity
2,700 kg and length 1.7 metres. Tubular structure
to improve the weight/capacity ratio. Winch
equipped with rope pressure roller and hydraulic
limit switch system for rope raising/lowering.

ATT – 04 – 019 Q-FIT I

JW 3000

Jib with integrated winch on attachment, capacity
3,000 kg and length 1.7 metres. Tubular structure
to improve the weight/capacity ratio. Winch
equipped with rope pressure roller and hydraulic
limit switch system for rope raising/lowering.

ATT – 04 – 021 Q-FIT I

JT 2500

Telescopic box-section jib with fixed hook. Two
capacities: fully retracted 2,500 kg at 1,800 mm;
extended 1,500 kg at 2,700 mm, with travel of
900 mm.

Simple but extremely versatile and resistant, Magni approved hooks offer a wide solution for use in the construction world. The range consists of hooks of different capacities to meet the specific needs of the market and to be able to
work with all the machine models offered.

ATT – 05 – 001 Q-FIT I

H6

Type-approved hook for swivel lifting with latch,
high-strength alloy steel. Capacity up to 6,000 kg.
Metal storage support included in code.

ATT – 05 – 003 Q-FIT I

H8

Type-approved hook for swivel lifting with latch,
high-strength alloy steel. Capacity up to 8,000 kg
Metal storage support included in code.

ATT – 05 – 005 Q-FIT I

H10

Type-approved hook for swivel lifting with latch,
high-strength alloy steel. Capacity up to 10,000 kg
Metal storage support included in code.

ATT – 05 – 013 Q-FIT I

H13

Type-approved hook for swivel lifting with latch,
high-strength alloy steel. Capacity up to 13,000 kg.
Compact design to increase performance during
loading in terms of the stability of the load.

ATT – 05 – 007 Q-FIT I

H16S

Type-approved hook for swivel lifting with latch,
high-strength alloy steel. Capacity up to 16,000 kg
Metal storage support included in code. Compact
design to increase performance during loading in
terms of the stability of the load.

ATT – 05 – 008 Q-FIT I

H20S

Type-approved hook for swivel lifting with latch,
high-strength alloy steel. Capacity up to 20,000 kg
Metal storage support included in code. Compact
design to increase performance during loading in
terms of the stability of the load.

ATT – 05 – 009 Q-FIT I

H30S

Oscillating lifting hook to facilitate load positioning.
Capacity up to 30,000 kg. Compact design to
increase performance during loading in terms of
the stability of the load.

ATT – 05 – 010 Q-FIT I

H40

Oscillating lifting hook to facilitate load positioning.
Capacity up to 40,000 kg. Compact design to
increase performance during loading in terms of
the stability of the load.

ATT – 05 – 011 Q-FIT I

H40S

Oscillating lifting hook to facilitate load positioning.
Capacity up to 40,000 kg. Compact design to
increase performance during loading in terms of
the stability of the load.

ATT – 05 – 012 Q-FIT I

H50

Oscillating lifting hook to facilitate load positioning.
Capacity up to 50,000 kg. Compact design to
increase performance during loading in terms of
the stability of the load.

Very specific accessories designed on stringent needs felt above all in the mining and extractive sector, and lately also of recycling. This is a range of accessories designed for changing tires of large truck dumpers used in the mine, capable of adapting to the performance of each Magni sold in the market.

ATT – 06 – 001 Q-FIT I

RC4T

Clamp made of high-strength material for
positioning the ribs comprising the supporting
arches for tunnel construction.

ATT – 06 – 003 Q-FIT I

TC2,5.25

Tyre clamp, 2,500 kg capacity, for 25” tyres.
Hydraulic opening/closing.

ATT – 06 – 004 Q-FIT I

TC3,5

Tyre clamp, 3,500 kg capacity, for 35” tyres.
Hydraulic opening/closing. Clamp rotation
(clockwise/anticlockwise): +/- 24°; tyre rotation
+/- 61°.

ATT – 06 – 005 Q-FIT I

TC3,8.49

Tyre clamp, 3,800 kg capacity, for 49” tyres.
Hydraulic opening/closing and 360° rotation

ATT – 06 – 006 Q-FIT I

TC08.63

Tyre clamp, 8,000 kg capacity, for 63” tyres.
Hydraulic opening/closing movement, 360° tyre
rotation, +/- 300 mm lateral clamp movement,
344° clockwise/anticlockwise clamp rotation.

ATT – 06 – 007 Q-FIT I

TC16.63 CP

Tyre clamp, 16,000 kg capacity, for 63” tyres.
Hydraulic opening/closing movement, 360°
rotation, +/- 300 mm lateral clamp movement,
344° clockwise/anticlockwise clamp rotation. Tyre
rotation of 360° performed via chains to provide
additional safety.

ATT – 06 – 008 Q-FIT I

PD CR5

Clamp used for primary demolition of reinforced
concrete. The continuous hydraulic rotation facilitates
positioning of the equipment, while the robust dual
ball race slewing bearing ensures strength and
increases safety. The cylinders develop enormous
force which is then increased and transferred to the
jaws (even completely open) by a unique mechanism.
The special teeth profile maximises penetration,
keeping the tips sharp for longer. The patented
Speed-Valve increases productivity and protects the
hydraulic system from peaks of pressure.

ATT – 06 – 009 Q-FIT I

PC 1000

Clamp designed to move pipes, load capacity up
to 1,000 kg, min. ø 242 mm and max. 580 mm.
The clamp has three degrees of freedom; 360°
rotation, side shift and clamps opening/closing

ATT – 06 – 010 Q-FIT I

CC

Clamp for the maintenance, replacement and
movement of large excavator cylinders up to
11,000 kg and max ø 620 mm. This attachment
must be installed with MTM, which must be
ordered separately.

ATT – 06 – 011 Q-FIT I

CC 4.5

Clamp for the maintenance, replacement and
movement of large excavator cylinders up to 4,500
kg and max ø 450 mm. Clamp side shift +/- 300
mm, 360° clockwise/anticlockwise clamp rotation,
and +/- 27° cylinder rotation. This attachment can
be used without the Multi Tool Manipulator (MTM).

The buckets complete the range of accessories in the Magni world, simplifying the processes in the construction and maintenance sector. They are also excellent allies for the recycling, agriculture and paper supply chain thanks to the various capacities and undisputed performances that they can offer to the professional users.

ATT – 07 – 001 Q-FIT I

CB 1000

Heavy-duty bucket with blade, capacity 1,000 kg.
Suitable for moving aggregates, sand, gravel and
similar materials around site.

ATT – 07 – 003 Q-FIT I

CB 2000

Heavy-duty bucket with blade, capacity 2,000 kg.
Designed to facilitate loading and unloading of
materials. Suitable for moving aggregates, sand,
gravel and similar materials around site.

ATT – 07 – 004 Q-FIT I

CB 3000

Heavy-duty bucket with blade, capacity 3,000 kg.
Designed to facilitate loading and unloading of
materials. Suitable for moving aggregates, sand,
gravel and similar materials around site.

ATT – 07 – 007 Q-FIT I

BIM 2000

Aggregates bucket with capacity up to 2,000 kg

ATT – 07 – 006 Q-FIT I

4X1 5900

Versatile four-in-one bucket for various site
uses. Ideal for picking up material with density
below≤2.1 kg/m3. Sides with teeth to ensure a safe
grip on cylindrical objects. Rear blade for terrain
levelling and recovery.

ATT – 07 – 009 Q-FIT I

4X1 850L

Bucket used for leveling and dumping by keeping
the clamp closed and angling the shovel forward
it will dig into the ground and the bucket will start
to fill with material. Once the bucket is full we
can load it directly into the dumper. The grading
function enable the operator to lay out material to
a required depth.
The depth can be varied by varying travelling
speed or how gap the bucket is opened. Use
the bucket to pick up materials or objects. Open
the bucket and drive it over the object to clamp.
Lower the bucket and safe close the bucket.Use
the bucket as a bulldozer, you open up the clamp
frame fully and by using the shovel frame allows
the machine to push material forward a layer at a
time.

Category entirely dedicated to accessories with very specific uses. These are codes used to carry out special works, such as removing large trees, cleaning the road with snow shovels, installing glass at high altitude and servicing aircraft. In Magni we are known for the tailoring skills to sew ad hoc solutions to each specific market request, even for the most demanding customers.

ATT – 08 – 001 Q-FIT I

TREE CUTTER

This grapple saw is the ideal solution for cutting
down special trees. Spring suspension system for
saw. Inclination function during the cutting process
which prevents the saw from being damaged. Cutting
diameter up to 75 cm.

ATT – 08 – 002 Q-FIT I

SCT

Accessory specially designed for the safe removal
of the suspension and front gearbox of dumpers.

ATT – 08 – 003 Q-FIT I

RWHT

Accessory specially designed for the safe removal
of the rear gearmotor of dumpers.

ATT – 08 – 004 Q-FIT I

Support designed for the use of the following
attachments: CC, SCT and RWHT.

ATT – 08 – 007

VACUUM MASTER

Vacuum Master is the ideal accessory for safely
moving pieces of glass in outdoor environments.
It allows loads of up to 600 kg to be lifted in the
horizontal and vertical position. The pieces can be
rotated by 90° in one plane and 360° in another,
and held at 45° increments. This allows for perfect
alignment of the glass components and their
insertion in the façade. Thanks to its modular
structure, the lifting device can be perfectly
adapted to the dimensions of the part. An LED
indicator provides information on the charge
status of the 12 V battery, which is rechargeable
and replaceable. The regulated vacuum pump
ensures constant operational availability for up to
8 hours.

ATT – 08 – 006 Q-FIT I

VACUUM MULTIFILTER 500

The Vacuum Multilifter 500 attachment is a unit
equipped with integrated electrical and hydraulic
systems, and therefore independent from the
power supply of the machine on which it is
mounted.
The head rotates and manipulates all items in all
directions, offering millimetre precision.
It offers an excellent level of safety during
movement thanks to a dual-circuit vacuum system
which offers a safety (overload) factor of 400%.
It is able to lift and handle all common
construction materials, such as façade
components, glass, concrete components, granite,
wood, steel etc.

ATT – 08 – 018 Q-FIT I

PAPER CLAMP

Clamp designed for the recycling industry,
heavy logistics and the paper / cellulose supply
chain. Designed to ensure maximum visibility of
the frame from all angles. The excellent profile
of the arms allows good functionality without
compromising resistance. The section of the frame
is made of steel, the arm bar in extruded steel
alloy and the bases of the cast iron arms therefore
a guarantee of durability and reliability. The built-in
hydraulic flow distributors and the bidirectional
pressure regulating valve regulate a fast and
synchronized movement of the arms.

ATT – 08 – 008 Q-FIT I

CBR

Attachment that facilitates the replacement of
conveyor belt belts. The attachment has two
stabilization feet to be used during the unwinding
/ winding phase and a hydraulically removable
column to allow you to grab or release the drum
centered on the motorized washers. It is possible
to move a drum on which the belt is wound up to
4m in diameter and 2.25m in length, with a capacity
of up to 25t.

ATT – 08 – 009 Q-FIT I

SNOW BLADE

Snow plough attachment featuring steel load-bearing
structure and quick-coupling counterplate to DIN 76060/A, or
alternatively a three-point coupling structure for front threepoint
hitches as typically found on agricultural machinery.
Front wing made from two 100% steel sections. Scraper blade
with six independent sections in wear-resistant steel. Impact
mitigation system featuring steel springs with adjustable
force on each individual sector of the scraper blade. These
flex backwards (against the direction of travel) in the event o f
a collision. Powder-coated steel load-bearing structure, with
special rustproofing treatment and RAL 2011 (orange) fina l
enamelling. Black HDPE wing.
Overpressure valve to damp lateral impacts, R2 piping with
unified quick fittings and couplings. The transformable LTL
blade can be set in a wedge position, inclined blade facing to
the left or right, or inverse wedge (spoon shaped).

ATT – 08 – 010 Q-FIT I

BB600

Concrete bucket, capacity 600 l, with opening via
hydraulic piston.

ATT – 08 – 019 Q-FIT I

BB800

Concrete bucket, capacity 800 l, with opening via
hydraulic piston.

ATT – 08 – 020 Q-FIT I

BB1000

Concrete bucket, capacity 1000 l, with opening via
hydraulic piston.

ATT – 08 – 014 Q-FIT I

MB 700 SL

The concrete bucket is equipped with bottom
and helix made of wear resistant steel HB400,
fixed safety rounded grill with bag breaker,
electric valve, hydraulic hoses, electric connection
kit., hydraulic opening of the bottom through a
cylinder with covered rod and unloading pipe.

ATT – 08 – 011 Q-FIT I

BB1000

Material loading bucket with reinforced structure
to ensure safe, solid loading. Rotation: 360°;
opening: 1,685 mm.

ATT – 08 – 012 Q-FIT I

SCT30T

Attachment designed specifically for moving large
steel coils in heavy industry.
Equipped with leveling indicator and an extra
translation +/- 300 mm to facilitate logistics
operations

ATT – 08 – 013 Q-FIT I

CH22T

Attachment designed specifically for moving large
steel coils in heavy industry, with diameters from
1,200 mm up to 1,600 mm. Pin inclination +/- 90°
and pin side shift +/- 300 mm.

ATT – 08 – 015 Q-FIT I

TFEH 4,6 T

Accessory that allows to move turbocharged fan
engines of aircraft (with a 4.8 t capacity)
The accessory has four floating attachment points
to allow easy attachment to the turbo fan. The
support of the attachment points can rotate
vertically 360 ° and horizontally (+/- 20 °). There is
also a translator with an excursion of +/- 300 mm.
It can be coupled with HTH from 16 t up.

ATT – 08 – 016 Q-FIT I

RRP 10.2,5 – 3,5

Platform equipped with two 110 V – 50 Hz
electrical outlets and a connection for compressed
air on board. The entire platform is lined with
non-marking rubber. It is also equipped with
2 cameras installed in the lower part of the
platform for complete visibility once in height.
The maneuvering area is visible on the display
mounted on the basket. Important anti collision
system on board which thanks to n. 9 sensors
arranged along the perimeter of the basket limits
movements when running a minimum safety
distance from an obstacle. The anti-collision
system thus begins to slow down the movements
until it stops completely when the part is close to
impact. The maneuvering area is always visible on
the display.

ATT – 08 – 017 Q-FIT I

REP 5.2 – 6.5 W0,6

Platform equipped with two 110 V – 50 Hz
electrical outlets and a connection for compressed
air on board. The platform is equipped with a
winch with a capacity of up to 600 kg. The entire
platform is lined with non-marking rubber. It is
equipped with 2 cameras installed in the lower
part of the platform for complete visibility once
in height. The maneuvering area is visible on
the display mounted on the basket. Important
anti collision system on board which thanks to
n. 9 sensors arranged along the perimeter of
the basket limits movements when running a
minimum safety distance from an obstacle. The
anti-collision system starts to slow down the
movements until it stops completely when the
part is close to impact. The maneuvering area is
always visible on the display.